News Center

News Center

Professional production of industrial brush rollers, rubber rollers, conveyor rollers and other mechanical accessories

Some information about using the strip brush?

Release time:

2023-02-09

The application range of the brush is very wide, we must need to know before using it.Strip brushThe characteristics of, so that you can better apply it. If you are interested in this topic, then take a look at it together, hoping to help some relevant people.

The strip brush is widely used in various industries, so its use is certainly very extensive. Actually this paragraphStrip brushIt is a commonly used tool in industry. Generally used to block dust from movable doors and windows, revolving doors, swing doors, automatic doors, and elevators to prevent dust from entering the room. In fact, buses, subways, trains and elevators are equipped with corresponding brush supporting products. The common ones are sealing strip brush, iron strip brush, stainless steel strip brush, horsehair, stainless steel wire, corrugated nylon wire, brick machine strip brush, nylon wire, etc. Because of the use, we also need to know the extension product of the brush, that is, the brush strip is spirally wound on the processed steel shaft, and the two ends are welded and fixed. It is characterized by high brush density and no shedding. In addition, there are some products that can be made into hollow spring brushes according to the size, and customers can install and replace them by themselves, and the use cost is lower. Some ordinary brush shafts can be made of 45# round steel, ordinary stainless steel and 304# stainless steel. According to different uses, the brush wire can be made of sisal, wool, polypropylene wire, steel wire, stainless steel wire, copper-plated wire, copper wire, abrasive wire and other materials.

In addition, the strip brush is widely used in the sealing of various automatic doors, doors and windows, revolving doors, sliding doors and elevators, and can cut off dust, so naturally it can also prevent dust from entering the interior, as well as the cleaning of large industrial machinery, the water blocking seal of glass edging machine, the internal storage cover seal of wind turbine, agricultural harvester and the brush of article cleaning machine. The brush is an indispensable accessory of modern industrial equipment. It is also necessary to know that the thickness of the strip brush is 3, 4, 5, 6, 7, 8, 10mm, etc. When cleaning the brush, we need to pay attention to the fact that we should never clean the bristles of the brush.Strip brushWhen cleaning, gently press with facial tissue or cotton fingers to let the water drain, but remember not to twist the brush, otherwise it will damage the brush and loosen the structure of the bristles, resulting in depilation. And can be washed after hanging brush, let brush down to dry. Of course, it also needs to be dried naturally. It cannot be dried with a hair dryer, and it cannot be dried in the sun, otherwise it may hurt the bristle material.

After the introduction of the above content, we have also learned some relevant information about the use of the brush. Other knowledge points will continue to be updated in the next period. If you have time, please remember to come and watch. There are customer service personnel to receive you 24 hours a day.