News Center

News Center

Professional production of industrial brush rollers, rubber rollers, conveyor rollers and other mechanical accessories

Notes on the brush

Release time:

2023-02-09

This paper introduces the precautions for the maintenance of the strip brush. The strip brush is widely used in the cleaning, polishing, polishing, rust removal and other industries of mechanical parts, plates, stone, process glass, electronic characterization, and produces corresponding effects. Manufacturers can according to user requirements or machine size for special processing, processing with steel wire, nylon yarn, bristle, wool, tin, abrasive, etc.

Nylon is a commonly used material in the strip brush factory, as always,Strip brushThe nylon brush line used in the industry can be divided into three categories: nylon 6, nylon 66 and nylon 612. In this case, nylon single 6 is a more economical material, double 6 is harder, and nylon 612 is harder. Nylon brush line is a very important strip of brush material,Strip brushThe relevant characteristics of the material are appropriate throughout the application. The surface of the joint part should be smooth and clean before installing a new gasket. The surface of the joint part should be cleaned of dirt. At the same time, the surface of the joint part should be checked for warpage, convex shell connecting screw holes, etc., and should be modified if necessary. The sealing effect of the seal can only be obtained if there is no warping.

The old sealing gasket cannot be reused. The sealing gasket installed between the surfaces of the two parts of the engine is on a compact gasket, and the surface roughness is consistent with the sealing effect. Therefore, every time the engine is maintained, the bushing should be replaced. Otherwise, the leak will be identified. The engine gasket should be properly placed before use, and should be placed in the original package before use. There should be no later stacking, overlapping, etc., and maintenance matters that need attention in later maintenance cannot be taken into account.

Introduction to the strip brush manufacturerStrip brushSupplies and matters needing attention in purchasing, with the development of science and technology, the positive development of the Internet has changed the sales methods of strip brush manufacturers and customers' choice of strip brush methods, and no longer adhere to the traditional on-site procurement. There are bar brushes that can be purchased directly and indirectly. Direct purchases are made directly from the manufacturer through communication tools such as the Internet or telephone, and indirect purchases are made at the industrial strip brush retailer. If the customer's demand for the brush is high, it is recommended that the customer know what they need in advance and consult with the manufacturer.

In addition, we should pay attention to the word-of-mouth problem that can bring direct profits to buyers and guarantee services.Strip brushThere are many types of sub-products, which can be selected according to their own needs, and the brush products are also different according to the application. The use of the strip brush depends on the material of the strip brush, but you must be familiar with the material of the cleaning strip brush and choose a high-quality strip brush that suits your needs. It is also very important to choose the right bar manufacturer.