Cleaning brush manufacturers to introduce you to the use of industrial brushes and brush strips

Cleaning brush manufacturers to introduce you to the use of industrial brushes and brush strips

1. Abrasive brushes used in the textile industry can be divided into two types: one with high silicon content and the other with low silicon content. The former requires high hardness, while the latter requires good wear resistance. Industrial brushes are mainly suitable for metal and non-metal workpieces. Generally manual, industrial grinding directly uses grinding wheels and other abrasive tools, but the grinding treatment of the textile industry requires the grinding brush roller to contain silicide. The number of silicon carbide mesh (density) contained in the grinding wire should be adjusted appropriately depending on the grinding fabric and the desired grinding result.

2. The polishing brush is used to remove burrs on the outer surface of the parabolic surface and polish the parabolic surface.Cleaning brushManufacturers believe that in order to achieve the mirror effect, the polishing brush is generally made of stainless steel or aluminum alloy. The polishing brush is easy to break during use, so there are certain requirements for its material and performance. Nickel-plated brushes are used for passivation of metal surfaces. The type and characteristics of the brush wire shall be determined according to different requirements. If the steel plate is strong, it is necessary to produce brush wire. In electroplating polishing, the ideal brush wire should be bronze wire. If like general metal materials as rust and deburring, the wire hardness is higher.

3. Dust brushes should be placed in the import and export of industrial components, assembly lines, doors and windows, etc., and the brush filaments should be kept at a certain distance from the surface (usually 1-2mm) so that they can be rubbed off during work. Due to the dust will adhere to the brush filament and reduce its performance; at the same time may also cause wear. There should be sufficient spacing between the brush filaments. In order to avoid dust penetration into these gaps, the structure and products caused by pollution. Therefore, the brush wire is required to have high elasticity, good lubricity and good antistatic effect.

　　4、Cleaning brushManufacturers believe that cleaning brushes are widely used in industrial roller brushes and are mostly used for deep processing of agricultural and sideline products. However, its working principle is quite different from the traditional roller brush: it is mainly used to remove the dirt attached to the processed surface; while the sweeper can effectively remove the dirt that has adhered to the workpiece; it does not produce any damage to the workpiece; the cleaning effect is good. In the dust removal process, the brush wire should have good wear resistance, high elasticity and corrosion resistance, and it is not easy to deform during use. If the brushing performance is not good, when the time between objects is at a certain position, grooves will be generated on the brush roller to damage the rolling brush function, and even the brush roller tension will be scrapped.

cleaning brush manufacturers: how to choose steel wire brush roller

The quality of the wire brush directly determines the quality of the wire brush roller. The steel wire brush roller is generally composed of steel ring and metal mesh. Surface treatment is required before use to make it have good wear resistance. Pay attention to clean up the impurities on the wire brush roller. The wire brush roll shall be kept clean. Prevent dust accumulation. Otherwise, it is easy to rust, rust and damage the equipment. When selecting the steel wire brush roller, you can observe whether the peak height of the brush is uniform or not, the color difference of the brush, and whether the metal base has rust spots and scratches. If the brush roller has the above problems, it may be a brush roller made of recycled steel wire.

2. The cleaning brush manufacturer believes that when the steel wire brush roller is running normally, if there is a large amount of brush wire deflection, deformation, splash or even roll deformation, it is very likely that the brush roller manufacturer will use insufficient materials.

3. Before some brush roller manufacturers leave the factory, they will clean the tiny dust adhered to the surface of the steel wire brush roller. Pay attention to details in the packaging process to avoid bumping during transportation. The wire brush roller needs to be polished and polished before use, otherwise it is easy to scratch the surface of the steel parts and reduce the service life. The cleaning brush manufacturer believes that there is a certain gap between the wire brush roller and the brush roller, and it cannot be fixed with tape. Do not disassemble the connecting parts at will, and carry out regular maintenance and maintenance. These details will add a lot of highlights to the rolling brush of the wire brush.