News Center

News Center

Professional production of industrial brush rollers, rubber rollers, conveyor rollers and other mechanical accessories

On the Characteristics and Uses of Steel Wire Roller Brush

Release time:

2023-02-09

Steel wire roller brushChoose the appropriate steel wire model according to the purpose, choose brushes with different steel wire diameters, the steel wire has straight lines and ripples, and the thickness of the steel wire may be different according to needs.

　　Steel wire roller brush, Usually suitable for steel or aluminum surface treatment plants, a series of stainless steel wire brush rollers are installed on a fully automatic high-speed work brush polishing machine (brush machine). The steel wire brush roller is opposite to the rolling movement direction and rotates at high speed on the upper surface of the strip to remove iron oxide. The wiped iron oxide plates are washed away using a closed circulating cooling water cleaning system. Generally, the thickness of the winding is 1.09-6.35mm, and the renewal period of the wire brush is every 20,000 T plate or 40,000 T roller produced.

　　Steel wire roller brushThe common specifications of 6*14 or 5*14 holes, wire material 304 stainless steel wire or general wire can be. Each hole is usually folded and transplanted 5, and the wire extends about 20mm. Usually the brush made of steel wire is easy to rust, and it is not necessary. Compared with the quality of the wooden handle steel wire brush made of 304 stainless steel wire, the quality difference is too large.

　　Steel wire roller brushIt is usually mechanically twisted between two wires or stainless steel wires or four steel wires by industrial pipes, machine screw hole cleaning and rust removal, polishing and cleaning, and pipe brushing process.

What is the main purpose of steel wire roller brush?

The main application range of steel wire roller is dustproof, polishing, cleaning and polishing.

The steel wire roller is mainly used for deburring and fine polishing the surface of the throwing object. Therefore, the type and characteristics of the steel wire must be determined to meet different requirements. If the need for strong hardness of the steel plate and other surface plating polishing, the ideal brush wire should be bronze wire. General metal material surface rust and deburring treatment, the use of good hardness of the steel wire can be. Steel plate mountain sanding drum, steel plate brush;

Wire brush rollers are usually used to cut off revolving doors, movable doors and windows and automatic doors. This is because the brush has high density, does not fall, and has good stability, which has a good effect on preventing door dust and achieves the purpose of cleaning. The following small brush about the characteristics and production process of steel wire brush roller.

The large steel wire roller brush is characterized by high brush density, no drop, good stability, and good effect on dust prevention. Brushes generally choose good elastic steel wire, impact aging resistance is also very strong. This brush is suitable for dust-proof work of industrial machinery and equipment, doors and windows, etc.

The brush shaft of the steel wire roller brush can use 45# round steel, ordinary stainless steel, 304# stainless steel, etc. Brush can use sisal, PP company, stainless steel, copper, wire, copper and other materials. The brush material is then helically wound around the machined steel shaft. The welding at both ends is fixed. This is our common brush products. The thickness of the strip bottom is generally divided into at least 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 12mm, which can be customized according to specific requirements. The length of the brush hair is the same, and a variety of specifications can be selected. The base material of the steel wire brush roller is generally made of stainless steel, electrolytic plate, galvanized plate, low carbon steel plate and other materials, which has the advantages of sturdiness and durability.