News Center

News Center

Professional production of industrial brush rollers, rubber rollers, conveyor rollers and other mechanical accessories

Process Flow and Manufacturing Technology of Steel Wire Roller Brush

Release time:

2023-02-09

At present, the steel wire roller brushes used in the steel industry mainly include spiral winding, internal welding assembly, spiral bite brush assembly, etc. Brushes typically use 0.5mm diameter nylon or abrasive nylon curved wire. In terms of life cycle, spiral occlusal steel wire roller brush occupies an important position.

The spiral occlusal steel wire roller brush is composed of a single brush sleeve, a key, a brush roller, and an end plate. It is a form of assembly of the entire brush roller. Nylon Brush

Single-piece brush, combined single-piece brush, compressed onto the brush roller shaft, fixed with a key and the end plates at both ends, and then the outer circumference of the nylon brush is turned as a whole.

This kind of steel wire roller brush has the characteristics of simple structure, reasonable design and long life.

This steel wire roller brush is assembled by superimposing several ring brushes on a hinge, each ring brush is tightened along the circumference of the ring metal sheet

Lots of brushes, adjacent brushes, brushes, brushes, brushes, brushes, brushes, brushes, brushes, brushes, brushes, brushes, brushes, brushes, brushes, brushes, brushes, brushes, brushes, brushes.

After the silk is worn for a long time, there are no polishing marks or polishing marks on the surface of the plate, and the cleaning quality has been greatly improved. After assembling a complete brush roll.

The outer circle of the nylon brush roller can be modified and polished as a whole to further improve the balance and extend the life.

The structure of traditional steel wire roller brushes has many defects, including insufficient overall rigidity and unsafe factors. The connection method is unreasonable. The balance requirement of structural design is ignored.

High cost, not environmentally friendly. For decades, the steel wire roller structure of cotton processing machinery has not changed significantly. This structure contains many drawbacks and safety risks.

Accidents often occur in production. In recent years, many new materials and technologies have appeared in the market, which provide a basis for the optimization design and improvement of steel wire brush rollers.

Based on his own design experience, the author analyzes and studies the structural defects of the traditional steel wire brush roller, and puts forward his own design scheme. Width is 3200mm

Take the lint vacuum cleaner wire roller brush as an example, mainly the improved design of the brush strip, the improved design of the brush material, the improved design of the brush plate, and the improved design of the roller brush structure.

Not the soul of the bristles? Interestingly, most brushers have little or no awareness of the quality of the abrasive, and there are even simple and straightforward misunderstandings. Some people do not recognize the factory

Buy at home casually or do not attach importance to quality, cheap to buy which, may not want to know, by others recommend decide. This is the performance of believing that others are more professional than themselves.

First of all, the steel wire roller brush to learn to understand the pros and cons of raw materials, the growth of an enterprise to stabilize the quality, the development of the cause,

withstand the long-term test of the market. It is recommended that all advocates observe more, learn more, analyze more, communicate more, and use it frequently, so that they can become experts even if the starting point is low.